Corner bead may form straight side on the edge line of 
plaster project to fight break or chap and to protect and 
strengthen the most fragile part of the plaster. Its wing 
may enter the plaster in depths in any edge line strongly.

Corner bead is very important for whitewash for plaster,
the construction of building and the finish of building 
may cause the corner place easy to destroy, using it 
will make construction easy and may save plenty of time.

Expanded angle beads have wings that allow for keying the plaster right up to the nose of the beads. Guarantee perfect bonds to provide the effective reinforcement at corners preventing plaster from cracking. Also provide the finished plaster corner a continuous true, strong and straight external corner.

Expanded metal can be fabricated into angle beads for wall construction. The expanded metal wings provide an excellent straight plaster corner.
Arch supplies plaster beads for both internal and external uses, standard wing angle beads for external render work only and thin-coat small-mesh expanded wing angle beads.
Arch expanded metal corner beads provide a true, straight corner which protects and reinforces plaster where it is most vulnerable. One size adjusts for thickness.

Stainless steel angle beads are specifically designed for cement based renders and should not be used with gypsum based plasters. It greatly reduces the time taken in forming sharp corner joints, end stops and other details.

Plaster Stop Bead

Finishes and reinforces plaster edges.
For 3mm plaster finishes on plasterboard or any smooth background.
The expanded mesh wings provide an excellent key for thin-coat plaster corners.

Perforated Metal Corner Bead

Perforated metal can be used to make corner beads to give more strength and firm opening.
Materials: Galvanized steel sheet or stainless steel.

Corner Bead is used for protection of the outer arras of a plaster corner against knocks. Large holes in the metal provide bond and are used for nailing. They are plastered over, using bead edge as a permanent screed rail. Actually, corner bead can be worked on any architectural work, esp. for protecting an angle of a wall.

	Technical Info
	Perforated metal can be used to make corner beads to give more strength and firm opening. Materials: Galvanized steel sheet or stainless steel.

Corner bead
This product is PVC profile bonded with fiberglass mesh for corner reinforcement, which is used widely for EIFS and drywall system.
The width for each side of PVC profile is 24mm,the width for each side of fiberglass mesh is 100mm,total length is 2.5m.We can make such product according to your own requirement.